AIRCRAFT AND AEROSPACE DEGREASERS

• Heavy parts degreasers
• Landing gear degreaser
• Struts cleaning machine
• Transmission parts cleaner
• Engine vapor degreasers
• Engine parts washer
• Electronics cleaning machine
• Fuel injector liquid degreasers
• Tube cleaning equipment
• Honeycomb degreasers
• Maskant liquid degreasers
• Grease vapor degreasers

Vapor degreasing is the fastest way to clean large parts. The problem is that vapor degreasers take too long to restore vapor after a part is placed in one, and half the time is wasted waiting for the vapor to recover while no cleaning is being done. We recommend using a vacuum vapor degreaser (Airless degreaser) for its vapor degreasing efficiency.

Read more about our Airless vacuum vapor degreasing efficiency.

When necessary, components are cooled prior to continuing the vapor degreasing process until they achieve the specified cleanliness levels. Despite multiple vapor degreasing cycles, our equipment maintains high throughput efficiency.

Read more on the performance of our vacuum vapor degreasers.

Components featuring dead-end holes, side channels, nested or internal surfaces pose significant challenges for contaminant removal using vapor alone. In such cases, our patented Vacuum Cycling Nucleation (VCN) process is highly effective and can be integrated with ultrasonic cleaning techniques. Ultrasonic cleaning, whether aqueous or solvent-based, can be employed post-VCN for thorough removal of contaminants from external surfaces if necessary. The VCN process guarantees the cleanliness of internal surfaces. In instances where ultrasonic methods might cause damage, the VCN process alone can achieve gentle and effective cleaning of both internal and external surfaces without risk of damage.

For applications requiring high-temperature operation, there is no need for concern. Our Vacuum Vapor Degreasers utilize high-boiling-point chlorinated solvents that comply with industry regulations. The NESHAP and SCAQMD standards permit the use of regulated solvents, provided emissions are maintained at low levels. 

Read more about our low-emission degreasers below.

High Capacity

Our systems can add extra heat to a system that requires a rapid heat-up time for heavy loads. We generally design for cleaning times between 10 and 30 minutes.

Solvent VCN Systems

Solvent VCN systems combine the capabilities of an Airless degreaser with the power of the VCN process.

Low Emissions

Our Vacuum Vapor Degreasing Systems are completely closed-loop systems. Emissions can escape only when opening the chamber. Because of this, our Vacuum Vapor Degreasing Systems have practically zero emissions.

Tube Cleaning Equipment

No more manifolding or multistep processes. Adding VCN processing to our Airless Degreasers removes  oils, grease, and chips automatically