VPS - Vacuum Processing Systems - Home
Vacuum Cycling Nucleation (VCN) VCN Technology About Vacuum Processing Systems Contact Vacuum Processing Systems News/Press VPS - Vacuum Processing Systems - Home
AQUEOUS VCN CLEANING SYSTEMS > INTERNAL BEARING PENETRATION

Internal Bearing Penetration

Bearing Cleaning Demonstrates the Power of VCN

VCN at low vacuum or low temperature can reveal the primary vapor bubble generation location in a part. Like the initial vapor bubble formation in a boiling pot of water, VCN bubbles like to form in tight areas like the crevices in the pot where water begins to boil. Vapor bubbles expel fluid and contaminant from the area and collapsing bubbles draws in fresh fluid.

  1. Pack your parts. VCN pressure is uniform throughout the chamber.
  2. Clean at lower temperatures if your part has sensitive materials.
  3. Clean in a controlled environment. Keep out ambient surroundings.
  4. Vacuum dry to prevent spotting.Reduce solvent loss or use lower surfactant concentrations for cost savings.
  5. Vacuum distill to concentrate waste and recycle solvent for additional operating cost savings.

The video shows how VCN can form vapor bubbles in very small spaces. Devices that never before could be cleaned , can now be cleaned, sterilized, and dried using the VCN process